MOD-LH_with-multi-color-lights.png
Images are representations only.

MOD-LH Light / Horn / Enclosure Modification Series

Brand: Precision Digital Corporation

PDA2301_Left_Provu_3_Layered_Colors_light_A.png PDA2301_Left_Provu_White_light_A.png PDA2301_Left_Provu_Yellow_light_0.png PDA2301_Left_Provu_Green_light_1.png PDA2301_Left_Provu_Blue_light_A.png
The MOD-LH Series is available in three different light configurations.

The MOD-LH can be powered from the ProVu’s 200 mA transmitter power supply with enough power left over to drive most transmitters.

When MOD-LH is ordered, the accompanying enclosure on the order comes with the holes pre-drilled for the Light / Horn and the Reset Button and the user performs the mounting and wiring.

Meter and enclosure are sold separately. 

The Light / Horn and the Reset Button can also be ordered as separate items and the user performs all hole-drilling, mounting and wiring as desired.
Features
  • Holes Drilled for Light / Horn and Reset Button in Enclosure
  • Single Lights Available in Red, Green, Yellow, Blue, or White
  • Units with One of Five User Selectable Lights Available
  • Units with Three Layered Lights Available
  • ProVu Meter Can be Equipped with up to 8 Relays to Drive Variety of Light & Horn Configurations
  • Light / Horn Programmable for Variety of Reset Functions, Including:
  • Silence Horn at Any Time
  • Light Stays on Until Alarm Clears
  • Light Can Be Wired to Flash (Not Available on MOD-LH5CB1) or Stay Steady On
  • IP 65 Rated
  • 85 dB Horn
  • Operates from -5 to 40°C (23 to 104°F)

Specifications

Brand

Recommended for These ProVu Models

  • PD6000
  • PD6001
  • PD6100
  • PD6200
  • PD6300

Light Colors

  • MOD-LHRB1: Red
  • MOD-LHGB1: Green
  • MOD-LHYB1: Yellow
  • MOD-LHBB1: Blue
  • MOD-LH5CB1: User selectable: red, green, yellow, blue, or white
  • MOD-LH3LCB1-RYG: 1 layer each of red, yellow, green (consult factory for other colors available).
  • MOD-LHWB1: White

Light Action

  • Can be wired to flash (not available on MOD-LH5CB1) or stay steady on

Light / Horn & Reset Button Installation

  • When MOD-LH is ordered with an enclosure, the user performs installation and wiring of Light / Horn and Reset Button in pre-drilled holes

Horn

  • 85 dB

Rating

  • IP 65

Light / Horn Independence

  • Light and horn can be controlled via separate relays

Power Requirement

  • When mounted remote: 24 VDC
  • No additional power required when wired to a ProVu meter.

Transmitter Power Supply

  • 200 mA

Power Requirement (MOD-LH & MOD-LH5CB1 models)

  • Green: 15 mA
  • Yellow: 23 mA
  • Blue: 15 mA
  • White: 42 mA
  • Horn: 20 mA
  • Red: 17 mA

Power Requirement (MOD-LH3LCB1-RYG)

  • Red: 34 mA
  • Green: 29 mA
  • Yellow: 33 mA
  • Horn: 38 mA

Reset / Silence Button

  • NEMA 4X; may be wired to F4 terminal on ProVu
  • F3 front panel button can also be used to reset relays.

Reset Button Labels

  • The Light / Horn accessory comes with 9 pre-printed message labels the user can affix under the red button: RESET, BATCH, ACK, TARE, SILENCE, STOP, START, PAUSE, START/STOP

Light / Horn Mounting Connection

  • M22

Hole Sizes

  • Light / Horn: 0.875" (22 mm)
  • Reset Button: 0.630" (16 mm)

Cable Length

  • 3.28 feet (1 meter)

Operating Temperature Range

  • -40 to 40° C (-40 to 104° F)

Documentation

Instruction Manual

show more